{"product_id":"casio-bms-100l-5a-100v-5a-lithium-battery-management-system","title":"CASIO BMS-100L-5A 100V 5A Lithium Battery Management System","description":"\u003cp\u003eThe CASIO BMS-100L-5A is a lithium battery management system for 100V lithium-ion packs with a 5A continuous discharge rating. It brings overcharge, over-discharge, overcurrent and short-circuit protection to DIY battery builds, electric bike packs, solar storage projects and power banks.\u003c\/p\u003e\n\u003cp\u003eThe protection board is built on a compact PCB that fits inside tight battery enclosures. Its layout combines overcurrent and short-circuit safeguards with voltage monitoring for each cell group. The 5A continuous discharge limit suits moderate loads, while the 100V maximum system voltage covers larger lithium-ion strings used in electric bikes, solar systems and industrial battery assemblies. Only the protection board is included, so plan for your own enclosure, wiring and sensors. The module does not include cell balancing, so check that cells are at similar voltage before you connect them.\u003c\/p\u003e\n\u003ch2\u003eKey features and benefits of the CASIO BMS-100L-5A Lithium Battery Management System\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e100V maximum system voltage\u003c\/strong\u003e: The board is rated for lithium-ion packs with a total voltage up to 100V. That lets it manage larger series strings such as those found in electric bikes and solar storage.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e5A continuous discharge rating\u003c\/strong\u003e: The CASIO BMS-100L-5A limits steady current draw to 5A. It suits light to moderate loads and helps keep cells and connected electronics inside their current limit.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOvercharge protection\u003c\/strong\u003e: The module watches cell-group voltage and disconnects the charger when a cell group reaches its upper limit. This reduces the risk of capacity loss and unsafe charging.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOver-discharge protection\u003c\/strong\u003e: The board cuts off the load when cell voltage drops too low. That prevents deep discharge, which can permanently damage lithium cells.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOvercurrent protection\u003c\/strong\u003e: A dedicated circuit detects current spikes and interrupts the circuit within milliseconds. It shields the pack from short-term overloads that could cause heat build-up.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShort-circuit protection\u003c\/strong\u003e: If a direct short appears across the output terminals, the board opens the connection at once. This rapid response protects wiring and the battery pack.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompact PCB layout\u003c\/strong\u003e: The protection circuitry sits on a small printed circuit board that fits inside tight battery enclosures. The layout integrates voltage monitoring with the protection circuits.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDurable construction\u003c\/strong\u003e: The board is built to resist vibration and thermal stress in mobile applications. That makes it a practical fit for packs used on bikes and portable equipment.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDIY and industrial suitability\u003c\/strong\u003e: Clear labeling and standard connector spacing help with custom pack assembly. The same board suits hobbyist builds and professional battery modules.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBoard-only package\u003c\/strong\u003e: The package contains the protection board only, with no enclosure, wires, sensors or mounting hardware. You choose the wiring and mounting parts that match your pack.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNo cell balancing\u003c\/strong\u003e: The BMS-100L-5A does not equalize cell voltages during charging. Make sure cells are already at similar voltage before you connect the board.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLithium-ion compatibility up to 100V\u003c\/strong\u003e: The module is made for lithium-ion packs whose total voltage stays at or below 100V. LiFePO4 packs can work where their voltage thresholds align with the board settings.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWho the Battery Management System is for\u003c\/h2\u003e\n\u003cp\u003eThe CASIO BMS-100L-5A suits people who assemble or repair lithium-ion packs and need 100V operation with 5A continuous current. Engineers, hobbyists and technicians can use it where space is tight and reliable protection against overcharge, over-discharge, overcurrent and short circuits matters. It also fits teaching settings where students learn about battery safety and management. A compact board helps in custom enclosures.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBuilding a 100V lithium-ion pack for an electric bicycle or scooter.\u003c\/li\u003e\n\u003cli\u003eAssembling a solar energy storage system from lithium-ion modules.\u003c\/li\u003e\n\u003cli\u003eMaking a high-capacity power bank for portable equipment.\u003c\/li\u003e\n\u003cli\u003eReplacing a lost protection board in an existing battery pack.\u003c\/li\u003e\n\u003cli\u003ePrototyping industrial battery modules that need 5A discharge protection.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eLess suitable if:\u003c\/strong\u003e your application needs a continuous discharge current above 5A. The board will trip its overcurrent protection and interrupt power, so choose a higher-current BMS for that load.\u003c\/p\u003e\n\u003ch2\u003eBattery Management System specifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eAttribute\u003c\/th\u003e\n\u003ctd\u003eValue\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eBMS-100L-5A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eCASIO\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProduct Type\u003c\/th\u003e\n\u003ctd\u003eLithium Battery Management System\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaximum System Voltage\u003c\/th\u003e\n\u003ctd\u003e100V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eContinuous Discharge Current\u003c\/th\u003e\n\u003ctd\u003e5A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProtection Functions\u003c\/th\u003e\n\u003ctd\u003eOvercharge, over-discharge, overcurrent, short circuit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePCB Design\u003c\/th\u003e\n\u003ctd\u003eCompact, durable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTypical Series Configuration\u003c\/th\u003e\n\u003ctd\u003e24S to 28S, depending on cell chemistry\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApplication\u003c\/th\u003e\n\u003ctd\u003eDIY battery packs, electric bikes, solar systems, power banks, industrial packs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCompatibility\u003c\/th\u003e\n\u003ctd\u003eLithium-ion packs up to 100V; LiFePO4 where voltage thresholds align\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCell Balancing\u003c\/th\u003e\n\u003ctd\u003eNot included\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eIncluded\u003c\/th\u003e\n\u003ctd\u003eProtection board only; no enclosure, wires, sensors or mounting hardware\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eUsing and caring for the CASIO BMS-100L-5A Lithium Battery Management System\u003c\/h2\u003e\n\u003cp\u003eMount the CASIO BMS-100L-5A in a ventilated part of the battery enclosure so heat from the protection components can escape. Use wires and connectors rated for the 5A current path, and check polarity before you apply power. Because the board does not balance cells, confirm that cell voltages are close before connection. Keep the board away from moisture and conductive debris.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMount the PCB on a non-conductive standoff so it cannot short against the battery case.\u003c\/li\u003e\n\u003cli\u003eVerify that total pack voltage stays at or below 100V under every charging condition.\u003c\/li\u003e\n\u003cli\u003eUse a charger that respects the overcharge threshold set by the BMS.\u003c\/li\u003e\n\u003cli\u003eCheck solder joints and connector pins from time to time for corrosion or loosening.\u003c\/li\u003e\n\u003cli\u003eKeep moisture and conductive debris away from the board so protection circuits are not bridged.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eHow to choose the right Battery Management System\u003c\/h2\u003e\n\u003cp\u003eChoose a battery management system by matching maximum pack voltage, continuous current, protection functions and board size to your build. The CASIO BMS-100L-5A supports packs up to 100V, which covers many 24S to 28S lithium-ion configurations. Its 5A continuous rating fits light to moderate loads such as e-bike motors or solar charge controllers. It provides overcharge, over-discharge, overcurrent and short-circuit protection on a compact board. Check that your charger and cell thresholds align before installation.\u003c\/p\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eWhat is the CASIO BMS-100L-5A made of?\u003c\/h3\u003e\n\u003cp\u003eThe module is built on a printed circuit board with surface-mount protection components. The PCB uses a standard fiberglass epoxy laminate.\u003c\/p\u003e\n\u003ch3\u003eWhat battery pack voltage does it support?\u003c\/h3\u003e\n\u003cp\u003eIt supports lithium-ion packs with a total voltage up to 100V. In practice that covers many 24S to 28S configurations, depending on the cell chemistry.\u003c\/p\u003e\n\u003ch3\u003eWhich protection functions are included?\u003c\/h3\u003e\n\u003cp\u003eThe board includes overcharge, over-discharge, overcurrent and short-circuit protection. Each function disconnects the pack when its fault condition is detected.\u003c\/p\u003e\n\u003ch3\u003eDoes the BMS-100L-5A balance cells?\u003c\/h3\u003e\n\u003cp\u003eNo, the CASIO BMS-100L-5A does not include cell balancing. Check that cells are at similar voltage before you connect the board.\u003c\/p\u003e\n\u003ch3\u003eWhat is included with the BMS-100L-5A?\u003c\/h3\u003e\n\u003cp\u003eThe package contains the protection board only. No enclosure, wires, sensors or mounting hardware are included.\u003c\/p\u003e\n\u003ch3\u003eCan it power a load above 5A?\u003c\/h3\u003e\n\u003cp\u003eNo, its continuous discharge rating is 5A, and the overcurrent protection will interrupt a higher load. Choose a higher-current BMS for high-power applications.\u003c\/p\u003e\n\u003ch3\u003eCan I use it with LiFePO4 cells?\u003c\/h3\u003e\n\u003cp\u003eYes, if the total pack voltage stays at or below 100V and the cell voltage thresholds match the board settings. Verify the voltage settings before use.\u003c\/p\u003e\n\u003ch3\u003eHow should I mount and connect the board?\u003c\/h3\u003e\n\u003cp\u003eMount the PCB on a non-conductive standoff in a ventilated area and use wires rated for the 5A path. Connect the pack leads, load and charger to the marked terminals and check polarity first.\u003c\/p\u003e","brand":"CASIO","offers":[{"title":"Default Title","offer_id":50059503501383,"sku":"BMS-100L-5A","price":30000.0,"currency_code":"PKR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0619\/3849\/9655\/files\/casio-bms-100l-5a-battery-management-system.webp?v=1794531955","url":"https:\/\/topa.pk\/products\/casio-bms-100l-5a-100v-5a-lithium-battery-management-system","provider":"Topa","version":"1.0","type":"link"}