The Beverly Hills Polo Club BP3830X.560 is a two-tone men's watch with a 39mm stainless steel case and a band that mixes silver links with ion-plated rose gold. It suits men who want one metal watch for office days, evenings and travel, and its 10 ATM water resistance adds practical room for daily use.
The watch runs on a 2-hand quartz movement, so the dial carries hour and minute hands only. A light rose gold dial sits behind blue-coated mineral glass, which is treated to reduce glare in bright conditions. The stainless steel band measures 20mm at the lugs and tapers to 18mm at the butterfly clasp, a hidden deployment fitting that opens with a press. The two-tone men's watch pairs the warmth of rose gold with the neutrality of silver, making it easier to wear with different metal accessories.
The Beverly Hills Polo Club BP3830X.560 suits men who prefer a metal watch that does not need switching between work and evening clothes. The silver and rose gold finish covers both accessory tones, while the 39mm case keeps the watch neat under a shirt cuff. It is a practical choice for someone who wants a quartz timekeeper with swimming-level water resistance.
Less suitable if: you need a stopwatch, a date window or luminous hands for low-light reading. This model has none of those functions.
| Brand | Beverly Hills Polo Club |
|---|---|
| Model code | BP3830X.560 |
| Case material | Stainless steel |
| Case colour | Silver |
| Case diameter | 39mm |
| Band material | Stainless steel |
| Band finish | Silver and ion-plated rose gold |
| Band width (lug / clasp) | 20mm / 18mm |
| Dial colour | Light rose gold (Pantone 7519C) |
| Glass type | Blue-coated mineral glass |
| Movement type | Quartz, 2-hand |
| Water resistance | 10 ATM (100 metres) |
| Clasp type | Butterfly deployment |
| Diamond setting | None |
| Date window | None |
| Stopwatch | None |
| Luminous hands | None |
| Wrist fit | 16cm to 20cm |
| Battery | Silver-oxide coin cell, SR626SW or equivalent |
| Warranty | 2 years international |
| Warranty coverage | Manufacturing defects; normal plating wear excluded |
Keep the BP3830X.560 clean and dry after contact with water, especially chlorinated pool water or salt water. Rinse the case and band with fresh water, then dry the links and clasp with a soft cloth so residue does not collect around the rose gold plating. Set the time with the crown pulled out one click, and push it fully back before the watch goes near water.
Four factors matter most in a daily metal watch: case size, metal tone, water rating and clasp style. The BP3830X.560 uses a 39mm stainless steel case that is listed as fitting wrists from 16cm to 20cm. Its two-tone silver and rose gold finish means it can sit with either metal accessory group. The 10 ATM rating is higher than the 3 to 5 ATM common on dress watches, so swimming is possible. The butterfly clasp gives a lower profile than a fold-over buckle and helps avoid cuff snagging.
The case is stainless steel with a silver finish and a 39mm diameter. Stainless steel resists corrosion and everyday knocks, which suits a watch worn regularly.
No. The rose gold sections are ion-plated stainless steel, not solid gold. The plating can show wear if it is repeatedly rubbed against hard surfaces.
No. The 2-hand quartz movement drives hour and minute hands only, with no date window and no second hand. The dial stays plain and the battery can last longer between changes.
Yes. The 10 ATM rating covers swimming, snorkelling, showering and accidental immersion. It is not rated for scuba diving or high-pressure water sports, and the crown should be fully pushed in before water contact.
Remove links with a standard pin-pusher tool or have a jeweller size the band. The butterfly clasp also has micro-adjustment holes for a finer fit.
It uses a silver-oxide coin cell, typically SR626SW or an equivalent. A watchmaker should fit it and pressure-test the seals afterwards.
No. The crystal is mineral glass with a blue anti-reflective coating, not synthetic sapphire. The coating helps reduce glare and adds some scratch resistance over standard mineral glass.
The two-year international warranty covers manufacturing defects. Normal wear to the ion plating is not treated as a defect, so scratches from daily contact are not included.